OCP44-L+I

(1 Panel) (4-Color) (Two Sided) (No Bleed)

(With Barcode Match Back Imprinting)

-L” = 7pt Matte Cardstock

+I” = With Imprinting

Size Specifications:

  • Live Image Area: 8.172 inches x 3.313 inches (588.375 points x 238.5 points)
  • Trim: (this is where the paper will be cut): 8.4375 inches x 3.625 inches (607.5 pts x 261 pts)

OCP44-L+I:  Is a Non-Bleed product with imprinting, build the layout using the Live Image Area size. Keep all layout elements that you don’t want to be trimmed or cropped, inside of the Live Image Area.

Click HERE to download the 1-Panel InDesign templates (Horizontal and Vertical Layouts).

Examples of properly built OCP44-L+I with barcode match back imprinting:

Horizontal Layout visual showing where the Trim and Live Area are located:

Horizontal Layout visuals showing where the Imprinting Area can be located:

For Human Readable Imprinting Codes:

The Imprinting Area is the available space for the Imprint Window. It must not be closer than .25″ from the Trim Area, and no more than 4″ from the Trim Area.

The Imprint Window is where the code will be printed, and the Imprint Window must be clear of all backgrounds, images, artwork or text.

The Flap/Front Position Imprint Window must be on side 1:

For the Flap/Front Position in the envelope, the Imprint Window must be located on side 1 and can be on the right or left side of the layout anywhere inside of the Imprinting Area, as seen in the visual below.

The Back/Last Position Imprint Window must be on side 2:

For the Back/Last Position in the envelope, the Imprint Window must be located on side 2 and can be on the right or left side of the layout anywhere inside of the Imprinting Area, as seen in the visual below.

For Imprinting Barcodes:

The Imprinting Area is the available space for the Imprint Window. It must not be closer than .25″ from the Trim Area on the left or right side, and not closer than 1 inch from the Trim Area on the top or bottom, and no more than 4″ from the Trim Area.

The Imprint Window is where the barcode will be printed, and the Imprint Window must be clear of all backgrounds, images, artwork or text.

The Flap/Front Position Imprint Window:

For the Flap/Front Position in the envelope, the Imprint Window must be located on side 1 and can be on the right or left side of the layout anywhere inside of the Imprinting Area (shown in gray), as seen in the visual below.

The Back/Last Position Imprint Window:

For the Back/Last Position in the envelope, the Imprint Window must be located on side 2 and can be on the right or left side of the layout anywhere inside of the Imprinting Area (shown in gray), as seen in the visual below.

**IMPORTANT IMPRINTING NOTE: The Imprint Window must be clear of all backgrounds, images, artwork or text.

For more information on Imprinting, please contact your Valpak representative.

How to build this product:

!!! INCORRECT:

Horizontal Layout visual showing an incorrectly built OCP44-L+I product. NNotice that some background images, text, and the business logo are outside the Live Image Area. This will result in these elements being trimmed when this is printed.

CORRECT:

Horizontal Layout visual showing a correctly built OCP44-L+I product. All of the layout elements are completely contained within the Live Image Area, and the Imprint Window is clear of all backgrounds, images, artwork or text.

PDF (press ready) Ad Submission Guidelines: Click Here