CP44-C+I

(1 Panel) (4-Color) (Two Sided) (No Bleed)

(With Barcode Match Back Imprinting)

-C” = 9pt UnCoated Cardstock Paper

+I” = Imprinting

Size Specifications:

  • Live Image Area: 7.9167 inches x 3 inches (570 points x 216 points)
  • Trim: (this is where the paper will be cut): 8.25 inches x 3.5 inches (594 points x 252 points)

CP44-C+I:  Is a Non-Bleed product with barcode imprinting, build the layout using the Live Image Area size. Keep all layout elements that you don’t want to be trimmed or cropped, inside of the Live Image Area. This product can also be designed for Imprinting.

Click HERE to download the InDesign templates (Horizontal and Vertical Layouts).

Examples of properly built CP44-C+I with barcode imprinting:

Horizontal Layout visual showing where the Trim and Live Area are located:

Horizontal Layout visual showing where the Imprinting Area can be located:

The Imprinting Area is the available space for the Imprint Window. It must not be closer than .25″ from the Trim Area, and no more than 4″ from the Trim Area.

The Imprint Window is where the barcode will be printed, and the Imprint Window must be clear of all backgrounds, images, artwork or text.

The Flap/Front Position Imprint Window must be on the right side of side 1:

For the Flap/Front Position in the envelope, the Imprint Window must be located on side 1 and on the right side of the layout anywhere inside of the Imprinting Area, as shown in the visual below.

The Back/Last Position Imprint Window must be on the left side of side 2:

For the Back/Last Position in the envelope, the Imprint Window must be located on side 2 and on the left side of the layout anywhere inside of the Imprinting Area, as shown in the visual below.

**IMPORTANT IMPRINTING NOTE: The Imprint Window must be clear of all backgrounds, images, artwork or text.

For more information on Imprinting, please contact your Valpak representative.

How to build this product:

!!! INCORRECT:

Horizontal Layout visual showing an incorrectly built CP44-K+I product. Notice that there are portions of text and part of the image positioned outside the Live Image Area. This will result in these elements being trimmed when this is printed.

 

CORRECT:

Horizontal Layout visual showing a correctly built CP44-K+I product. All of the layout elements are completely contained within the Live Image Area, and the Imprint Window is clear of all backgrounds, images, artwork or text.

PDF (press ready) Ad Submission Guidelines: Click Here

CP44-C+I

(1 Panel) (4-Color) (Two Sided) (No Bleed)

(With Barcode Imprinting)

-C” = 9pt UnCoated Cardstock Paper

+I” = Imprinting

Size Specifications:

  • Live Image Area: 7.9167 inches x 3 inches (570 points x 216 points)
  • Trim: (this is where the paper will be cut): 8.25 inches x 3.5 inches (594 points x 252 points)

CP44-C+I:  Is a Non-Bleed product with barcode imprinting, build the layout using the Live Image Area size. Keep all layout elements that you don’t want to be trimmed or cropped, inside of the Live Image Area. This product can also be designed for Imprinting.

Click HERE to download the InDesign templates (Horizontal and Vertical Layouts).

Examples of properly built CP44-C+I with barcode imprinting:

Horizontal Layout visual showing where the Trim and Live Area are located:

Horizontal Layout visual showing where the Imprinting Area can be located:

The Imprinting Area is the available space for the Imprint Window. It must not be closer than .25″ from the Trim Area, and no more than 4″ from the Trim Area.

The Imprint Window is where the barcode will be printed, and it can be on the left or right side of the layout anywhere inside of the Imprinting Area.

**IMPORTANT IMPRINTING NOTE: The Imprint Window must be clear of all backgrounds, images, artwork or text.

For more information on Imprinting, please contact your Valpak representative.

How to build this product:

!!! INCORRECT:

Horizontal Layout visual showing an incorrectly built CP44-K+I product. Notice that the “Speed Pass” artwork is outside the Live Image Area. This will result in this element being trimmed when this is printed.

CORRECT:

Horizontal Layout visual showing a correctly built CP44-K+I product. All of the layout elements are completely contained within the Live Image Area, and the Imprint Window is clear of all backgrounds, images, artwork or text.

PDF (press ready) Ad Submission Guidelines: Click Here

OCB44-L+I

(1 Panel) (4-Color) (Two Sided) (With Bleed)

(With Barcode Match Back Imprinting)

-L” = 7pt Matte Cardstock

+I” = With Imprinting

Size Specifications:

  • Live Image Area: 8.172 inches x 3.313 inches (588.375 points x 238.5 points)
  • Trim: (this is where the paper will be cut): 8.4375 inches x 3.625 inches (607.5 pts x 261 pts)
  • Bleed: 8.6875 inches x 3.875 inches (625.5 points x 279 points)

OCB44-L+I:  Is a Bleed** product with barcode match back imprinting, background images and art elements can extend to the Bleed size. Keep all layout elements that you don’t want to be trimmed or cropped, inside of the Live Image Area.

** IMPORTANT Note about Bleed Products: Valpak’s templates are intentionally built without bleed settings applied. If using a Valpak template and your product calls for a bleed, do not enter any bleed settings. Instead, simply build your layout according to the bleed margins designated on the template.

Click HERE to download the 1-Panel InDesign templates (Horizontal and Vertical Layouts).

Examples of properly built OCB44-L+I with barcode match back imprinting:

Horizontal Layout visual showing where the Bleed, Trim and Live Area are located:

Horizontal Layout visuals showing where the Imprinting Area can be located:

For Human Readable Imprinting Codes:

The Imprinting Area is the available space for the Imprint Window. It must not be closer than .25″ from the Trim Area, and no more than 4″ from the Trim Area.

The Imprint Window is where the code will be printed, and the Imprint Window must be clear of all backgrounds, images, artwork or text.

The Flap/Front Position Imprint Window must be on side 1:

For the Flap/Front Position in the envelope, the Imprint Window must be located on side 1 and can be on the right or left side of the layout anywhere inside of the Imprinting Area, as seen in the visual below.

The Back/Last Position Imprint Window must be on side 2:

For the Back/Last Position in the envelope, the Imprint Window must be located on side 2 and can be on the right or left side of the layout anywhere inside of the Imprinting Area, as seen in the visual below.

For Imprinting Barcodes:

The Imprinting Area is the available space for the Imprint Window. It must not be closer than .25″ from the Trim Area on the left or right side, and not closer than 1 inch from the Trim Area on the top or bottom, and no more than 4″ from the Trim Area.

The Imprint Window is where the barcode will be printed, and the Imprint Window must be clear of all backgrounds, images, artwork or text.

The Flap/Front Position Imprint Window:

For the Flap/Front Position in the envelope, the Imprint Window must be located on side 1 and can be on the right or left side of the layout anywhere inside of the Imprinting Area (shown in gray), as seen in the visual below.

The Back/Last Position Imprint Window:

For the Back/Last Position in the envelope, the Imprint Window must be located on side 2 and can be on the right or left side of the layout anywhere inside of the Imprinting Area (shown in gray), as seen in the visual below.

**IMPORTANT IMPRINTING NOTE: The Imprint Window must be clear of all backgrounds, images, artwork or text.

For more information on Imprinting, please contact your Valpak representative.

How to build this product:

!!! INCORRECT:

Horizontal Layout visual showing an incorrectly built OCB44-L+I product. Notice that the business logo is outside the Live Image Area. This will result in the business logo being trimmed.

CORRECT:

Horizontal Layout visual showing a correctly built OCB44-L+I product. The background is fully extending to the bleed size, and all the important layout elements are completely within the Live Image Area.

PDF (press ready) Ad Submission Guidelines: Click Here

OCB44-L+I

(1 Panel) (4-Color) (Two Sided) (With Bleed)

(With Barcode Imprinting)

-L” = 7pt Matte Cardstock

+I” = With Imprinting

Size Specifications:

  • Live Image Area: 8.172 inches x 3.313 inches (588.375 points x 238.5 points)
  • Trim: (this is where the paper will be cut): 8.4375 inches x 3.625 inches (607.5 pts x 261 pts)
  • Bleed: 8.6875 inches x 3.875 inches (625.5 points x 279 points)

OCB44-L+I:  Is a Bleed** product with barcode imprinting, background images and art elements can extend to the Bleed size. Keep all layout elements that you don’t want to be trimmed or cropped, inside of the Live Image Area.

** IMPORTANT Note about Bleed Products: Valpak’s templates are intentionally built without bleed settings applied. If using a Valpak template and your product calls for a bleed, do not enter any bleed settings. Instead, simply build your layout according to the bleed margins designated on the template.

Click HERE to download the 1-Panel InDesign templates (Horizontal and Vertical Layouts).

Examples of properly built OCB44-L+I with barcode imprinting:

Horizontal Layout visual showing where the Bleed, Trim and Live Area are located:

Horizontal Layout visual showing where the Imprinting Window can be located:

The Imprinting Area is the available space for the Imprint Window. It must not be closer than .25″ from the Trim Area, and no more than 4″ from the Trim Area.

The Imprint Window is where the barcode will be printed, and can be on the left or right side of the layout anywhere inside of the Imprinting Area.

**IMPORTANT IMPRINTING NOTE: The Imprint Window must be clear of all backgrounds, images, artwork or text.

For more information on Imprinting, please contact your Valpak representative.

How to build this product:

!!! INCORRECT:

Horizontal Layout visual showing an incorrectly built OCB44-L+I product. Notice that the business logo is outside the Live Image Area. This will result in the business logo being trimmed.

 

CORRECT:

Horizontal Layout visual showing a correctly built OCB44-L+I product. The background is fully extending to the bleed size, and all the important layout elements are completely within the Live Image Area, and the Imprint Window is clear of all backgrounds, images, artwork or text.

PDF (press ready) Ad Submission Guidelines: Click Here